Salt Lamp Bulb

E14 replacement bulbs for Himalayan salt lamps, available in 15W and 25W.

These Eveready / tungsten salt lamp bulbs use an E14 fitting and are intended for Himalayan rock salt lamps that use the same E14 bulb holder.

Which wattage do I need?

• 15W E14 bulb: suitable for salt lamps weighing up to approximately 5kg.

• 25W E14 bulb: suitable for salt lamps weighing up to approximately 15kg.

Before ordering, check the fitting on your existing bulb or lamp holder. It should be marked E14. Use the wattage recommended for your lamp and do not exceed the lamp or holder rating.

Compatibility

Suitable for Himalayan salt lamps that use an E14 small Edison screw fitting. If your lamp uses a different fitting, these bulbs will not be compatible.

How to replace a salt lamp bulb

1. Switch the lamp off and unplug it from the mains.

2. Allow the bulb and lamp to cool fully before handling.

3. Carefully remove the old bulb from the E14 holder.

4. Fit the replacement E14 bulb securely without forcing it.

5. Reconnect the lamp and check that it lights normally.

If you are unsure which bulb your lamp needs, compare the fitting and wattage printed on the existing bulb before ordering.